Label printer SQUIX 4.3/300MP

Product Number: 5977023

In stock

£2,421.82 £2,018.18

NEED SOME EXPERT ADVICE? CALL US ON 01952583685

Description Technical Data Video

Label Printer SQUIX 4.3 Peel and Present Version for Small Labels (MP), Centre Aligned Material Guide, 300dpi,

Label Printer	SQUIX 2		SQUIX 4.3		SQUIX 4		SQUIX 6.3
Printhead
Print Resolution dpi	300	600	203	300	300	600	203	300
Material Feed	Left-aligned
Printing Method	Thermal Transfer & Direct Thermal
Print speed maximum mm/s	250	150	250	250	300	150	250	250
Print Width maximum	56.9	54.1	104	108.4	105.7	105.7	168	162.6
Print Start: Distance to locating edge mm	2		2.8	1.2	2		0.5	3.2
Material
Roll Fed Labels	Paper, Card, PET, PP, PI, PVC, PU, Acrylate, TYVEC, Heatshrink Tubes, Textile/Wash Care Labels
Labels Width mm	4 - 63		20 - 116				46 - 176
Labels Height without label back feed minimum mm	4		6				6
Labels Height with label back feed minimum mm	4		6				12
Labels Height with label back feed when dispensing mm	6		6				12
Labels Thickness mm	0.03 – 0.60
Carrier/Liner Width	24 - 67		24 - 120				50 - 180
Carrier/Liner Thickness	0.03 – 0.16
Continuous material width mm	24 - 67		24 - 120				50 - 180
Continuous material thickness mm	0.05 – 0.5
Continuous material maximum weight g/m²	300
Heat shrink tubes maximum width mm	N/A		120				N/A
Heat shrink tubes maximum thickness g/m²	N/A		1.1				N/A
Roll, Reel: Maximum outside diameter	205 / 38.1 - 76 180 / 100
Roll, Reel: Core diameter	38.1 - 100
Roll, Reel: Winding	Outside or inside
Ribbon
Ink side	Outside or inside
Roll diameter up to mm	80
Core diameter mm	25.4
Ribbon length up to m	450
Width mm	25 - 57		25 - 114				50 - 170
Internal Rewinder in Peel off version
Outside Diameter Maximum mm	142
Core Diameter	38.1 - 40
Wind Direction	Outside
Printer size and weights
Width x Height x Depth mm	200 x 288 x 460		252 x 288 x 460				312 x 288 x 460
Weight kg	9		10				14
Label sensor with position indication
Gap Sensor	Labels or punch marks and end of material, printed registration marks in transparent materials.
Reflective sensor from below or top	Labels and end of material, printed registration marks in non-transparent materials
Distance sensor to locating edge left-aligned mm	5 - 26		5 -60				5 - 60
Height of material gap maximum mm	2
Electronics
Processor high speed 32-bit clock rate MHz	800
Main Storage (RAM)	256
Data Storage (IFFS)	50
Plug-in for SD memory card (SDHC, SDXC) up to GB	512
Battery for time and date, real-time clock	Standard
Data storage when power turned off (e.g serial numbers)	Standard
Interfaces
RS232C 1.200 to 230.400 baud/8 bit	Standard
USB 2.0 Hi-speed Device for PC connection	Standard
Ethernet 10/100 BASE-T	LPD, IPv4, IPv6, RawIP printing, DHCP, HTTP, FTP,SMTP, SNMP, TIME, NTP, Zeroconf, SOAP web service
1 x USB Host at the operation panel for 1 x USB Host at the operation panel for	Service Key or USB memory stick USB WLAN Stick 2.4 GHz 802.11b/g/n
2 x USB host on the back side for	Service key, USB memory stick, keyboard, barcode scanner, USB blue tooth adapter, USB WLAN stick
WLAN 802.11b/g/n, hotspot or infrastructure mode GHz	2.4 as Standard / 5 Optional
Periphery connection USB host, 24 VDC	Standard
Digital I/O with 8 inputs and outputs peel-off/basic device	Standard / Optional
Operating Data
Power Supply	100 – 240 VAC – 50/60 Hz, PFC
Power Consumption	Standby <10W / typical 150 W / maximum 300W
Temperature/Humidity Operation	+5 - 40°C/10 - 85%, not condensing
Temperature/Humidity Storage	0 - 60°C/20 - 80%, not condensing
Temperature Humidity Transport	-25 - 60°C/20-80%, not condensing
Approvals	CE, FCC, Class A, CB, CCC, UL

https://www.cab.de/media/pushfile.cfm?file=2767