The cutter CU8 is an optional peripheral device suitable for use with the A-series and M-series printers. With the cutter unit installed, labels or continuous material may be cut when desired.
Cutter options include a choice of: cut after each label, cut after a specific quantity of labels, or cut at the end of a print job.
The cutters are powered and controlled directly by the peripheral port of the printer and for cutter operation, the printer firmware will extend the label for cutting based on specific displacements, then automatically back feed the label, so that after making a cut, the label roll will be repositioned for printing of the next label.
Material width max
67 - 110 (mm)
Material weight cardboard
60 - 500 (g/m²)
0.05 - 0.8 (mm)
> 5 (mm)
120 - 130 (1/min)
Peripheral connector of the printer
Enquire about the Cutter CU8
Fill in your contact details, and one of our team will be in touch as soon as possible.